.st0{fill:#FFFFFF;}

Best Siding Nailer: Top 4 Siding Nailer Reviews 

 February 3, 2021

By  NailGunPro

Affiliate Disclosure: Some links may be affiliate links. We may get paid if you buy something or take an action after clicking one of these.

The best siding nailer is meant to help you install siding on your home. Different than a framing nailer, for instance, a siding nailer has one main job: join thinner pieces or non-wooden material into a wooden mount. And, yes, many people try to use another nailer for the job, but this is not appropriate. If you’re going to be installing siding, it’s important to have the best siding nail gun for the job – and there are a lot to choose from. We’ve rounded up our top four picks to provide you with siding nailer reviews of the best models in the industry. From Hitachi to Makita, we cover them all.

Best Siding Nailer Comparison Chart

Siding Nailer Models

Basic Information

Price

Makita AN611

  • Air-powered (Pneumatic)
  • Operating pressure: 65 to 120 PSI
  • Nail size accepts: 1-1/4" to 2-1/2"
  • Magazine Capacity - 300-400
  • Weight - 5.1 lbs 
  • 3 Year Limited Warranty

BOSTITCH N66C

  • Air-powered (Pneumatic)
  • Operating pressure: 70 to 120 PSI
  • Nail size accepts: 1-1/4" to 2-1/2"
  • Magazine Capacity - 300-350
  • Weight - 4.7 lbs
  • 1 Year Limited Warranty

Metabo HPT NV65AH2

  • Air-powered (Pneumatic)
  • Operating pressure: 70 to 120 PSI
  • Nail size accepts: 1-1/2" to 2-1/2"
  • Magazine Capacity - 200-300
  • Weight - 4.8 lbs
  • 5 Year Limited Warranty

Freeman PCN65

  • Air-powered (Pneumatic)
  • Operating pressure: 70 to 110 PSI
  • Nail size accepts: Plastic Collation: 1-1/4" – 2-1/2" / Wire Collation: 1-3/4" – 2-1/2"
  • Magazine Capacity - 200-400
  • Weight - 5.5 lbs
  • 7 Year Limited Warranty

4 Best Siding Nailer Reviews

Makita AN611

4.4 / 5

Makita makes the best siding nail gun on our list. The AN611 is packed with power, features three mode selection, a built-in air filter for dust and debris minimization, and even has a multi-directional exhaust port to allow for exhaust to be diverted away from the user.

Known for their high quality products, Makita truly hit a home run with the AN611. Let’s take a look at some of the features that this model offers:Makita AN611

Features:

  • 3-mode design (contact, lock and sequential).
  • Air filter to minimize dust and debris.
  • Multidirectional exhaust port.
  • 9 depth adjustments.
  • 1-1/4-inch – 2-1/2-inch nail sizes.
  • Protective rubber bumper.

Specifications:

  • Weight: 5lbs.
  • Dimensions: 13.2” x 5” x 12.5”.
  • Power Source: Air.
  • PSI: 65 – 120.
  • Warranty: 1-year.

This is a high-end model that’s more expensive, but for a specialty nailer, it doesn’t get better than this. Relatively light and high quality, we found that using this nailer was a breeze, and there are so many extra features included. Dust and debris are never an issue thanks to the built-in air filter, and the exhaust port can be moved 360°, so you never have to worry about exhaust getting in your face while working.

With a nice rubber grip and a good balance, you’ll be able to use this model without feeling fatigue in the process. You never have to worry about changing triggers as there are three selector modes for sequential, balance and locking the unit in place. When it comes to adjusting depth settings, you’ll have nine convenient settings to choose from.

Using this nailer since 2006, it is the most durable model we’ve ever had the pleasure of using. You’ll even be able to use siding nails with lengths of 1-1/4” – 2-1/2-inch. Once you’ve adjusted the depth settings, you’ll be able to use this model for hours without stopping. With easy loading and a non-jam mechanism, this is the perfect nail gun for construction workers and home users.

BOSTITCH N66C

4.7 / 5

BOSTITCH offers the #1 best seller in the power siding nailers category on Amazon. This model isn’t as powerful as the Makita, but it gets the job done. The BOSTITCH N66C is backed by a lot of good reviews, a variety of features and can drive 1 ¼-inch – 2 ½-inch nails with ease. If you’re on a tighter budget, this is a perfect model for you.

Features:

  • Drives plastic inserted coil and wire weld coil nails.
  • Tool free exhaust adjustment.
  • Adjustable depth guide.
  • Soft wood protection with a rubber foot.
  • Works with any air compressor.

Specifications:

  • Weight: 4.9lbs.
  • Dimensions: 11” x 5” x 12”.
  • Power Source: Air.
  • PSI: 70 – 120.
  • Warranty: 7-year.

Powerful and affordable, this model has driving power equal to 515 in./lbs. – it’s powerful. You’ll be able to adjust the nail depth, and the durable aluminum housing means that this model is lightweight: just 4.9 pounds.

Operating at 70 – 120 PSI, the nail magazine allows you to drive 350 nails before needing to reload. And one of the main selling points of this model is that it comes with a seven-year warranty. The BOSTITCH N66C, however, lacks a built-in air filter, or else it may have been number one on our list.

Metabo HPT NV65AH2

(Former Hitachi NV65AH2)

4.7 / 5

We’ve said it before: Hitachi offers some of the best siding nailers in the industry. The Metabo HPT NV65AH2 (Former Hitachi NV65AH2) is a coil siding nailer that has a tilt bottom magazine that’s quick to load, offers tool-less depth adjustment, has a protective plastic shield, and offers two selective modes: sequential and contact.

This is a very powerful siding nailer. It can hold 200 – 300 nails at a time, and can drive nails as large as 2 ½” x .099” at a rate of three per second.

Features:

  • Nail diameter accommodation of .090 – .099.
  • Nail length capability of 1 ½” – 2 ½”.
  • Adjustable air deflector.
  • Depth adjustment dial.
  • Side load, tilt bottom magazine.
  • Built-in selective switch.

Specifications:

  • Weight: 4.9lbs.
  • Dimensions: 11.4” x 5.1” x 11.1”.
  • Power Source: Air.
  • PSI: 70 – 120.
  • Warranty: 5-year.

If you’re sitting there scratching your head wondering why anyone would choose the more expensive Hitachi or Makita over the BOSTITCH or Freeman, just look at the features that the NV65AH2 offers.

Filling up the side load, tilt bottom magazine with 200 – 300 nails (depending on the diameter and length) and being able to drive nails at a rate of three per second means that you’ll be able to finish your siding project in record time. Depth adjustment is easy, and a selective switch allows you to use sequential or contact nailing for the utmost in accuracy and safety.

You’ll be able to drive a variety of different nail lengths and diameters with ease. And there’s even a safety shield to protect you against any debris that may kick back.

The Hitachi NV65AH2 is one of the best siding nail guns in the world. Packed with power, this nailer will do the job fast and efficiently without any jamming in the process.

Freeman PCN65

4.4 / 5

The Freeman PCN65 is the last of our siding nail gun reviews, and comes in at #4 on our list. While you won’t find many of the same features that the other models offered, this model is the best budget siding nailer on the market today.

Driving nails at 15° with sizes of 1 ¼” – 2 1/2:”, the PCN65 is a very powerful model. You’ll have a finger depth adjustment, a 360° adjustable exhaust, and even an air filter to remove dust and keep the nail gun operating perfectly at all times.

Features:

  • 1 ¼” – 2 ½” nail accommodation.
  • 360° adjustable exhaust.
  • Finger depth adjustment.
  • Air filter and dust.
  • Safety lock built into the trigger.
  • Works with any air compressor that can keep consistent pressure.

Specifications:

  • Weight: 8lbs.
  • Dimensions: 13.2” x 11” x 5”.
  • Power Source: Air.
  • Warranty: 7-year.

We were surprised to find that this model had built-in safety locks and an adjustable exhaust. We also liked that this model can be used for nails with lengths of 1 ¼” – 2 ½”. The main difference between this model and other models that are much higher on our list is that you don’t have the opportunity to choose sequential or contact nailing (which high-end models offer), and you have to adjust the depth with your finger.

Besides this, Freeman offers a very feature-rich siding nailer that will fit into any budget.

We never had an issue getting the job done with the PCN65. It works perfectly, but it does lack some of the power and great features that the previous three models offer.

The Freeman PCN65 is the ideal choice for anyone that is on a tight budget. This model can be used to put siding up with ease, and it offers many advanced features that make it the perfect choice for beginners and advanced users alike.

Conclusion

When doing any siding job, you need the best siding nailer to get the job done quickly and efficiently. We’ve listed the top four models in our siding nailer reviews for you to choose from, and now it’s your choice to pick the right one for your budget and needs.

You May Also Like


Best Siding Nailer: Top 4 Siding Nailer Reviews
{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}

"As an Amazon Associate we earn from qualifying purchases."

nailgunpro.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.